Tipping-bucket ombrometer that measures quantity and intensity of precipitation

Non aspirated sensor designed to measure air temperature. High accuracy Excellent linearity ...

DHV39 is a rotating, optoelectronic sensor with frequency pulse out, for measuring wind speed.  Low-threshold starting speed Res...

DHV116 is a rotating, optoelectronic sensor with frequency pulse output for measuring wind speed.  Low-threshold starting speed ...

The EGH 140 is a rotating type wind speed sensor and gives accurate wind speed data for any one axis of a chosen coordinate system. The vane is mad...

DSV39A is a rotational, digital, optoelectronic sensor to measure wind direction.  Low-threshold starting speed Resistant to all...

Wind transmitter VMT107A is a combined sensor for wind speed and wind direction.  Small dimensions Low-threshold starting speed ...

KVT60A is a combined rotation sensor for wind speed and wind direction.  Low-threshold starting speed Resistant to all weather c...

DTE 75A/5 is a non aspirated air temperature sensor with special sensor support, designed to measure the air temperature on 5 cm above the ground. ...

The aspirated air temperature sensor DTA 32 is, due to the motor forced aspiration, much less sensitive to the influence of other meteorological pa...

Precipitation detector DVL 142G is modified version of leaf wetness sensor DVL 142. It is used to detect precipitation. Heating element in this sen...

Leaf wetness sensor DVL 142 is used to detect humidity on the leaf surface.

For RH, air temperature or combined sensors Naturally aspirated UV resistant A...

DTV 124 is non-aspirated sensor designed to measure air temperature and relative humidity.

The CMP 6 pyranometer is intended for routine measurements of global solar radiation.

TPR159 is non-aspirated sensor designed to measure air temperature, relative humidity and pressure. Small dimensions Resistant to all...

Pyranometer CMP 11 is particularly suitable for meteorological networks and the reduced response time of 1.66 seconds (63%) meets the requirements ...

The SMP11 smart pyranometer combines class leading sensor technology with industry standard digital and analogue amplified outputs.It is ideal for ...

The new ML3 represents the latest step in the evolution of the ThetaProbe series, offering extra features, improved performance and a new look.&nbs...

The ST2 is probe with a high specified thermistor sensor (2000 Ohms). It has accuracy of  +/- 0.1 degC over a temperature range of 0 to 70 d...

The SWS Surface Wetness Sensor is a low-power electronic device for meauring surface moisture.

SP Lite2 is designed for routine measurement of solar radiation. It is especially designed for: Photovoltaic / solar energy module moni...

Simple non-heated rain gauge with tipping bucket - intended for liquid precipitation measurement only.  With pulse per 0.2mm/m2 output. ...

The CM 4 High Temperature Pyranometer is a radiometer specially designed for measuring solar or artificial light irradiance under the most extreme ...

Secondary standard pyranometer with minimized maintenance thanks to its internal desiccant, designed for meteorological networks and solar energy a...

Pyranometer for Meteorological networks, reference measurements in extreme climates, polar or arid. ...

Pyranometer for Scientific research requiring the highest level of measurement accuracy and reliability. ...

Fastest and best performing ISO 9060 Second Class pyranometer. Smart Pyranometer SMP3 is perfect for monitoring solar energy installations, agricul...

High performance 3D wind and turbulence sensor.   3 wind components x, y, z and acoustic temperature T.   Robust stainles...

Accurate and reliable 3D wind and turbulence sensor, 3 wind components x, y, z and acoustic temperature T, Robust stainless steel construct...

Price competitive 3D wind and turbulence sensor, 3 wind components x, y, z and acoustic temperature T, Robust stainless steel construction ...

Price competitive 2D wind sensor, 2 wind components x, y and acoustic temperature T, Robust stainless steel (V4A), High accuracy due to...

Very robust 2D wind sensor, Full functionality of uSonic-2 Wind, Well suited for measurement under high mechanical load. ...

Compact 2D flow sensor, 

Small installation depth,

Optimized for underground subways or traffic tunnels.

1D sensor for directional flow.

Innovative rotor mounted anemometer for wind turbines.

Heated rain gauge with tipping bucket - intended for liquid and solid precipitation measurement

Non-heated rain gauge with tipping bucket - intended for liquid precipitation measurement only

Heated rain gauge with tipping bucket - intended for liquid and solid precipitation measurement 

Weighing sensor precipitation. With data and pulse output.

Is suitable for use in any system where a digital output to a computer or logger is required.

The Visibility and Present Weather Sensor is the best combined visibility and present weather sensor on the market today.

The Visibility Sensor is suitable for use in applications where visibility, fog and other obstructions to vision must be measured.

The  Visibility and Present Weather Sensor with measuring ranges up to 50 km is designed to detect snow, rain, drizzle, fog and haze on roads ...

The Visibility Sensor measuresvisibility and present weather conditions and well as providing information on past weather.

The Present Weather Sensor is a cost effective solution for measuring visibility and present weather designed for use on highways and for general m...

CSD 3 measures sunshine duration. Sunshine duration is defined by WMO as the time during which the direct solar radiation exceeds the level of 120 ...

The most accurate weighting rain gauge on the market today. The  AEPG Rain Gauge collects percipitation through a standard 8 inch NWS orif...

The RQ-30 is a sensor for continuous discharge measurement of rivers, open channels and canals with known cross-section profile. The sensor uses in...

With the mobile measuring device RP-30 (Radar Profiler) a surface velocity profile from rivers and channels is created and together with the data o...

The RL-15 / RL-35 is a highly accurate measuring device to measure the surface water level without direct contact to the medium.

The USH-8 is an ultrasonic sensor for the precise, continuous and non-contact recording of snow depths. The robust design, a special ultrasonic hea...

The Snow Melt Analyser (SMA) constitutes the ideal measuring solution for the analysis of snowmelt. With its help, melting processes in the snow ca...

The Rain-O-Matic "Small" is a compact and accurate rain gauge intended for use in remote or hard to access sites.

The Rain-O-Matic "Tower" rain gauge is a versatile rain gauge made by the Pronamic company, intended for general use.

Professional grade rain gauge made by the Pronamic company in Denmark.

Professional grade rain and snow gauge made by the Pronamic company in Denmark.

Professional grade rain gauge made by the Pronamic company in Denmark.

Rain[e] is a compact weighing precipitation sensor made by the Lambrecht Meteo company.

The AIO 2 All in One Weather Sensor (P/N 102888) is the next-generation weather instrument that measures temperature, relative humidity, wind speed...

Global (Total) and Diffuse irradiance in W.m-2 WMO sunshine threshold: 120 W.m-2 direct beam DNI (Direct Normal Irradiance) calcula...

DustIQ measur a solar panel dirt. • Optimal choice of time for cleaning solar panels and consequently their efficiency • New tech...

The SOMLEVEL-15 is the ideal radar sensor for non-contact level measurement in all standard applications where a high degree of performance is requ...

Delta T WET150 soil sensor is the ideal sensor for research of soil conditions – and for integration into SDI-12 environmental and horticultu...

Delta T soil moisture probe PR2 enables you to monitor your soil water profiles or record soil moisture changes over time. It provides unprecedente...

Delta T EQ3 Equitensiometer measures water potential (matric potential) in the range 0 to -1000 kPa. Is an accurate and reliable alternative to wat...

The Belfort 6450 VisWx Present Weather Sensor is designed to monitor visibility conditions over a range of 6m-80km, as well as report weather condi...

Belfort ES-642 Remote Dust Monitor is an industrial air-quality sensor designed to provide real time particle concentration measurements in both in...

Belfort's barometric pressure sensor 092 measures absolute atmospheric pressure between 600 and 1100 hPa, which makes it suitable for elevation...

The Belfort Model 6400 Visibility Sensor is designed to monitor visibility conditions over a range of 6m-80km. Includes both digital and relay outp...

Lambrecht u[sonic]WS weather sensor is user-friendly all in one solution. It measure 7 weather parameters: wind direction and speed, air temperatur...

The Sommer RHD is a rain sensor which detects changes of the acoustic pressure that are induced by the impact of raindrops or hailstones. With its ...

The Biral BTD-350 Thunderstorm Detector is a standalone sensor that reliably detects the presence of all forms of lightning (Cloud-to-cloud, cloud-...

The Kipp&Zonen Pyregeometer SGR4A is a device that measures near-surface infra-red radiation spectrum in the wavelength spectrum approximately ...

The Kipp&Zonen Pyrheliometer SHP1 is a sensor that measures solar irradiance coming directly from the sun. It is suitable for climatological re...

The Kipp&Zonen UV Radiometer SUV5 is a sensor that measures total UV irradiance. Specific parts of the UV spectrum such as UVA, UVB or UVE / UV...

The Kipp&Zonen CNR4 net radiometer is used to measure heating power of radiation at the Earth's surface. Specifically it measures the diffe...

The Kipp&Zonen Quantum sensor PQS1 PAR provide the measurement of photosynthetic active radiation (light spectrum 400-700 nm). This is the part...

The Kipp&Zonen RT1 is the perfect solution for monitoring the efficiency of commercial rooftop PV installations. It fits to a corner of any sol...