Pyranometer CMP 11
Pyranometer CMP 11 is particularly suitable for meteorological networks and the reduced response time of 1.66 seconds (63%) meets the requirements for solar energy applications.
CMP 11 uses the temperature compensated detector technology originally developed for the CMP 22 and is a step up in performance from the CMP 6. It is particularly suitable for meteorological networks and the reduced response time of 1.66 seconds (63%) meets the requirements for solar energy applications.
A waterproof socket is fitted for the signature yellow signal cable, which is available in a range of lengths pre-wired to the waterproof plug.
The integral bubble level is raised to the top of the housing and can be viewed without removing the redesigned snap-on sun shield, which also covers the connector. The connector with gold-plated contacts allows for easy exchange and re-calibration. The screw-in drying cartridge is easy to remove and the replacement desiccant is supplied in convenient refill packets.
The Pyranometer does not require any power, it supplies a low voltage of 0-20 mV in relation to the amount of incoming radiation. When a higher voltage level or a 4-20 mA signal is required, the AMPBOX is the perfect solution.
| Spectral range | 285 to 2800 nm |
| Sensitivity | 7 to 14 µV/W/m² |
| Response time | < 5 s |
| Zero offset A | < 7 W/m² |
| Zero offset B | < 2 W/m² |
| Directional error (up to 80° with 1000 W/m² beam) | < 10 W/m² |
| Temperature dependence of sensitivity (-10 ºC to +40 ºC) | < 1 % |
| Operational temperature range | -40 °C to +80 °C |
| Maximum solar irradiance | 4000 W/m² |
| Field of view | 180 ° |
| Title | Description | Filename |
|---|---|---|
| Brochure - pyranometer CMP11 | KippZonen_Brochure_Pyranometers.pdf | |
| Manual - Pyranometer CMP11 | KippZonen_Manual_CMP_CMA_series_Pyranometers_Albedometers-0.pdf |
For more information
Although we are working with AMES recently, however we are impresed by the quality, ease of use and stability of AMES products.
Read more
