SpectroTRACER Aqua - Spectrometric probe
SpectroTRACER Aqua is a continuous operating measurement system for nuclide specific detection of even lowest level gamma contamination in liquids.
The probe performs spectroscopic analysis of the measurement in order to identify the detected radionuclides. SpectroTRACER is used for radiation monitoring when a standard gamma dose rate monitor is not efficient enough and when it is required to qualify the nature of the gamma radiation.
The instrument is designed for operation under harsh conditions demanding minimum maintenance. Low power consumption enables stationary or mobile applications using battery back-up or solar supply.
The SpectroTRACER Aqua probe is a continuous measurement system for detecting lowest gamma radiation in water but also perfectly suited for high gamma radiation measurement, e.g. in emergency cases. It performs a spectrometric analysis of the measurement to identify the detected radionuclides. The device is suited to gamma monitoring whenever a pure gamma dose rate monitor is not efficient enough or for qualifying the nature of the gamma radiation.
The probe has a thermal protection of scintillator/PMT and is available with a Nal(Tl), a LaBr3(Ce) or CeBr3 Brillance detector, that allows different dose rate measuring range (according to IEC60846), different activity detection and identification of nuclides of artificial isotopes and natural background and different stability against temperature variations.
Low power consumption allows stationary and mobile application: up to 10 days of autonomy with battery back-up package or unlimited operation by solar power.
The compact mobile setup can be installed within a few minutes and is available with several wireless data transmission options. The options for data transmission include LAN, WIFI, 2G/3G/4G/LTE, Satellite or proprietary ShortLINK/SkyLINK radio. The latter is used for transmission of the ambient dose rate and the activity data of major nuclides.
All SpectroTRACER components are integrated into hermetically sealed housing allowing permanent and maintenance-free operation even under harsh conditions. The compact design of the probe includes: detector – HV – preamp – MCA – low power PC – LAN interface – Optional: GPS, wireless data transmission modules, GM module (two Geiger Muller tubes, up to 10 Sv/h).
Radiation type |
X and Gamma |
Max depth to be sink |
100 m |
Detector types |
• LaBr3 Brillance 1.5”x1.5” • NaI(Tl) 3″x3″ or 2”x2” • CeBr3 1.5”x1.5” |
Measuring unit |
H*(10), Bq/m^3, Bq/l |
Dose rate measuring range |
• LaBr3: up to 3 mSv/h • NaI(Tl): up to 200 uSv/h • CeBr3: up to 3 mSv/h |
Measurement cycle |
1 min to 24 h, user configurable |
Energy range |
From 30 keV to 2 MeV or 30 keV to 3 MeV (configurable) with 8192 channels, 80 MHz sampling |
Integrated nuclide library – radioelement identification |
Cs137, Cs134, K40, I131, mTc99, Co57, Co58, Co60, Fe59, Ra226, Eu152, Eu154. Other additional isotopes upon request from the user |
Dimensions |
Diameter 120 x 160 mm Lenght 540 mm |
Weight |
≈ 4,8 kg depending on the type of detector |
Internal storage |
2 GB (allows up to 1 year local data storage in 10 min mode) |
Built-in sensors |
Temperature |
Temperature (Operating) |
-20°C to +50°C (option – 30°C to + 60°C) |
Hermeticity |
IP 68 (hermetically sealed housing), battery backup enclosure IP 65 |
Power supply |
230V 50Hz or 10-24V, 2.5W |
Backup battery |
4 or 10 days/charger and solar panel (optional) |
Communication interfaces |
2G/3G/4G/LTE, ShortLINK/SkyLINK radio, satellite, WIFI or Ethernet, DSL with ANSI N42.42 data format |
GPS functions |
DataExpert-assisted mapping |
Mobile use |
Boat |
Options |
|
Hardware options |
|
Data transmission options |
|
Software options |
|
Title | Description | Filename |
---|---|---|
SpectroTRACER Aqua datasheet | 2021_06_09_Datasheet_Spectrotracer_Aqua.pdf |
For more information

We are satisfied with the instrument, thank you for quick delivery.
We think it is the best Handheld station available now.
Aki Paananen - MeteoExpert