Recordum Airpointer +PM: Multifunction particulate matter monitor
The Airpointer is a complete air quality measuring system. It is based around a modular construction method, which enables wide customization options for the customer. It can easily be installed and connected at any point, where measurements are required. Compliance with interanational standards assures the highest quality of measurements.
The Airpointer has a built in system for control and data acquisition, and can be extended with a wide variety of AMES external or internal sensors.
The Airpointer +PM differs from other models in the range in that it can have a type certified particulate matter sensor (PM10 and PM2,5) installed. The PM sensor on the Airpointer +PM is type approved, and in accordance to all European standards relating to PM measurements. For more information on this sensor contact AMES d.o.o..
The Airpointer‘s modular design comprising a base unit, analyzing modules and sensor modules allows for a configuration according to different application requirements. The Airpointer offers a choice of analysis modules using type approved reference methods for monitoring airborne pollutants (SO2, NO2/NOX, CO, O3 and PM) classified as relevant by the EU, the WHO, the US-EPA and further responsible organizations all over the world. With our fully integrated gas chromatograph we can measure BTX (Benzene/Toluene/Ethylbenzene/Xylene) without any carrier gas and provide daily automated calibration check. A fast optical system or an approved PM analyzer is used for monitoring PM.
The Airpointer‘s compact design enables it to be installed almost everywhere: Industrial sites, in traffic, within enclosed areas, construction sites, airports or even on the back of a trailer or utility vehicle, which enables mobile measurements.
Due to its optimized thermal management, the airpointer consumes less power compared to conventional monitoring stations.
The system saves the data locally and can also present it there. The Airpointer has a built in web server, which enables control of the Airpointer from anywhere on the globe, as well as transfer and display of measured data. The web application can also display graphical data and can be accessed from any device, even mobile phones and tablets.
The PM sensor on the Airpointer +PM is certified sensor and operates using a different mechanism: Beta Ray Attenuation. This is a radiometric measurment, where particles are deposited on a moving filter belt and exposed to beta radiation. Varying beta absorption during sampling defines the mass of the deposited particles. In addition, the Airpointer +PM supports up to 2 additional pollution sensor modules. It also includes support for external PM sensors, which can be connected using built-in interfaces. The data gathered from external sensors can be stored, viewed and transfered using the Airpointers software.
|
Pollutants – Standard modules |
2 of the following modules |
|
|
NO/NO2/NOx |
Weight: 12,0kg Optional: SPAN module |
|
|
NH3 |
Samo v kombinaciji z NOx modulu |
|
|
O3 |
Weight: 5,8kg Optional: SPAN module |
|
|
SO2 (H2S) |
Weight: 8,5kg Optional: SPAN modul e Optional: H2S module |
|
|
CO |
Weight: 9kg Optional: SPAN module |
|
|
PM module |
Type certified PM10 or PM2,5 sensor (Thermo 5030 SHARP or MetOne BAM1020) |
|
|
More sensor modules |
Photoionisation detector (PID) for volatile organic (VOC) |
|
|
Nephelometer for indicative PM monitoring (PM10, PM2,5) |
||
|
Meteorological sensors: wind direction and velocity, temperature, air pressure, relative humidity, precipitation... |
||
|
Traffic data sensors: Traffic count, made by various manufacturers |
||
|
Senzorji hrupa; od različnih proizvajalcev |
||
|
Electrochemical sensors for formaldehyde, ethane, chlorine... For industrial applications, environmental hygiene, indoor air quality monitoring (IAQ) |
||
|
Sensors for monitoring indoor CO2 (IAQ) |
||
|
GPS navigation sensors for linking monitoring data with geographical data |
||
|
Radioactivity sensors |
||
|
Dimensions (H/W/D) |
1200/782/615mm 47,2/30,8/24,2 in |
|
|
Weight |
73,9kg/162,9lbs |
|
|
Power consumption |
Max. 670W |
|
|
Air flow |
<2000 ccm/min + 2000 ccm/min for the nephelometer |
|
|
Construction |
Well-isolated double aluminium construction |
|
|
Standard monitoring modules on removable drawers |
||
|
Rugged inconspicuous burglar proof design |
||
|
Standard equipment |
Internal air conditioning and temperature control |
|
|
Maintenance hatch |
||
|
Cylinder lock (standard) |
||
|
Zero air supply |
||
|
Operating temperature |
From -20°C/-4°F to +42°C/108°F (optional heater for temeratures down to -40°C/-40°F) |
|
|
Optional equipment |
Various types of mounting brackets |
|
|
Wireless communications (GPRS, 3G, WiFi...) |
||
|
Sample gas conditioning (High relative humidity, high PM exposure) |
||
|
Integration of external devices and instruments (e.g. 4-20mA, RS-232, Modbus via IP) |
||
|
Solutions to communicate with external data systems (TCP-IP; Modbus via IP; RS-232; 4-20mA... |
||
|
Various base frames and handling devices for on-site operation (roadside, workshop, indoor, pickup truck bed, trailer...) |
||
| Title | Description | Filename |
|---|---|---|
| Airpointer brochure | Airpointer brochure | Main_airpointer_brochure_engl_20121.pdf |
Product has no videos.
For more information
We have been working with AMES for more than a decade and they are a reliable partner, who takes care that their equipment works flawlessly, gives professional support and is always ready to listen to the customer's wtishes when it comes to upgrades.
Bernarda Podgoršek Kovač
Manager of the environmental protection service
