Recordum Airpointer 4D: Multifunction air pollution monitor
The Airpointer is a complete air quality measuring system. It is based around a modular construction method, which enables wide customization options for the customer. It can easily be installed and connected at any point, where measurements are required. Compliance with interanational standards assures the highest quality of measurements. The Airpointer has a built in system for control and data acquisition, and can be extended with a wide variety of AMES external or internal sensors.
The Airpointer 2D is the base model which only supports 2 sensor modules, compared to 4 on the Airpointer 4D.
The Airpointer‘s modular design comprising a base unit, analyzing modules and sensor modules allows for a configuration according to different application requirements. The Airpointer offers a choice of analysis modules using type approved reference methods for monitoring airborne pollutants (SO2, NO2/NOX, CO, O3 and PM) classified as relevant by the EU, the WHO, the US-EPA and further responsible organizations all over the world. With our fully integrated gas chromatograph we can measure BTX (Benzene/Toluene/Ethylbenzene/Xylene) without any carrier gas and provide daily automated calibration check. A fast optical system or an approved PM analyzer is used for monitoring PM.
The Airpointer‘s compact design enables it to be installed almost everywhere: Industrial sites, in traffic, within enclosed areas, construction sites, airports or even on the back of a trailer or utility vehicle, which enables mobile measurements.
Due to its optimized thermal management, the Airpointer consumes less power compared to conventional monitoring stations.
The system saves the data locally and can also present it there. The Airpointer has a built in web server, which enables control of the Airpointer from anywhere on the globe, as well as transfer and display of measured data. The web application can also display graphical data and can be accessed from any device, even mobile phones and tablets.
Gallery
Recordum Airpointer 4D: Multifunction air pollution monitor
Technical data
|
Pollutants – Standard modules |
2 of the following modules |
|
|
NO/NO2/NOx |
Weight: 12,0kg Optional: SPAN module |
|
|
NH3 |
Samo v kombinaciji z NOx modulu |
|
|
O3 |
Weight: 5,8kg Optional: SPAN module |
|
|
SO2 (H2S) |
Weight: 8,5kg Optional: SPAN modul e Optional: H2S module |
|
|
CO |
Weight: 9kg Optional: SPAN module |
|
|
More sensor modules |
Photoionisation detector (PID) for volatile organic (VOC) |
|
|
Nephelometer for indicative PM monitoring (PM10, PM2,5) |
||
|
Meteorological sensors: wind direction and velocity, temperature, air pressure, relative humidity, precipitation... |
||
|
Traffic data sensors: Traffic count, made by various manufacturers |
||
|
Senzorji hrupa; od različnih proizvajalcev |
||
|
Electrochemical sensors for formaldehyde, ethane, chlorine... For industrial applications, environmental hygiene, indoor air quality monitoring (IAQ) |
||
|
Sensors for monitoring indoor CO2 (IAQ) |
||
|
GPS navigation sensors for linking monitoring data with geographical data |
||
|
Radioactivity sensors |
||
|
Dimensions (H/W/D) |
890/782/400 mm 35/30,8/15,8 in |
|
|
Weight |
65,1kg/145,1lbs |
|
|
Power consumption |
Max. 670W |
|
|
Air flow |
<2000 ccm/min + 2000 ccm/min for the nephelometer |
|
|
Construction |
Well-isolated double aluminium construction |
|
|
Standard monitoring modules on removable drawers |
||
|
Rugged inconspicuous burglar proof design |
||
|
Standard equipment |
Internal air conditioning and temperature control |
|
|
Maintenance hatch |
||
|
Cylinder lock (standard) |
||
|
Zero air supply |
||
|
Operating temperature |
From -20°C/-4°F to +42°C/108°F (optional heater for temeratures down to -40°C/-40°F) |
|
|
Optional equipment |
Various types of mounting brackets |
|
|
Wireless communications (GPRS, 3G, WiFi...) |
||
|
Sample gas conditioning (High relative humidity, high PM exposure) |
||
|
Integration of external devices and instruments (e.g. 4-20mA, RS-232, Modbus via IP) |
||
|
Solutions to communicate with external data systems (TCP-IP; Modbus via IP; RS-232; 4-20mA... |
||
|
Various base frames and handling devices for on-site operation (roadside, workshop, indoor, pickup truck bed, trailer...) |
||
